Actually, the GenIII 15x8's will not fit the GenII Dak unless spacers are
used on the front (they will rub, otherwise). Spacers will also require
longer studs. IMHO, unless you're just really set on the factory look, you
can get a better rim from many suppliers out there (such as Centerline) that
will fit just fine without spacers. If you wanna go cheap, ARE has 15x8's
(AR-767) that bolt right up to a GenII with no problems, for about $36 each.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:25 EDT