I used Ultra-Copper on both surfaces with the gasket and it still isn't
leaking yet. Just torque it, let it sit, and recheck the torque one more
time before reinstallation.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of DICEMAN469@aol.com
Sent: Tuesday, September 05, 2000 11:01 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: MPI?
In a message dated 9/5/00 11:42:15 AM Eastern Daylight Time,
GSWillhite@ualr.edu writes:
> Well I took my TB off the manifold to take it apart
> and give it its annual cleaning and decided to shine
> a flashlite down the intake to see how the bellypan
> gasket was doing....ARRRRRRGGGGHHH! OIL! Now I know
> it has to come off, so COME ON GUYS! Fess up! Is the
> MPI really a worth while upgrade? To be honest I don't
> look forward to redoing the stock bellypan gasket again,
> once is enough.
Do what I'm gonna do, RTV the shit outta it
-Austin
Vipertruck
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:26 EDT