No that is a lie. The more you lower a differential, the more correction is
needed. I would install them and then have a driveshaft shop check the
angles and adjust the angle using shims.
Mark Kuzia
flyboy01@mediaone.net
http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 99.52 mph
360ci, 5-spd, 4.11 LS, Ram-air
----- Original Message -----
From: <Y2KDakuda@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Monday, September 11, 2000 6:00 PM
Subject: DML: Lowering the dak
> UPS came by today and droped off my drop kit. the only thing is the 3"
blocks
> are not angled. I call them and he said that it won't effect the pinion
angle
> is that correct or do i need something else.
>
> Thanks chris
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:31 EDT