Does it matter, Bernd? Even if it doesn't, I'm sure you'll find a way
to prove them wrong.
"Bernd D. Ratsch" wrote:
>
> Yes...but will it fit on a V6. ;)
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of Stlaurent Mr Steven
> Sent: Tuesday, September 12, 2000 8:49 AM
> To: 'dakota-truck@buffnet.net'
> Subject: DML: Twin Supercharger
>
> I could not get hold of PAXTON for a new twin centrifuge SC. But I talking
> to a racing engineering shop locally and it look like the following needs to
> be applied:
>
> 1. TWIN SC centrifuge with intercooler-including custom fabrication
> 2. Twin air intake
> 3. HO Fuel pump
> 4. Modified fuel rail
> 5. HO fuel filter
> 6. Twin TB modification fabrication is needed to the intake
> 7. Modified the intake for more air/fuel
> 8. HO PCM
> 9. larger exhaust system-prefer dual version
> 10. Stock injectors may need to raised to #30 or 32
> 11. several Dyno runs
> 12. Under pulleys
> 13. 160 degree thermostat
> 14. replace all hoses for braided version
> 15. may require an aftermarket coil over plugs depending on spark load
> 16. may require some head modifications
>
> Some of you already know few parts are still not available but according to
> the auto engineers it can be done. The results 110 percent plus gain based
> on 6-8PSI per SC. Durability? Hmm! That is a mystery until one's tested
> the theory.
>
> -------------------------------------------
> Steven St.Laurent
> Test Engineer
> Test Branch, GSD, MCTSSA
> MARCORSYSCOM, USMC
> 760-725-2506 (DSN 365-2506)
> Work:mailto:stlaurents@mctssa.usmc.mil
> Home:mailto:saint1958@home.com
-- -andyhttp://home.twcny.rr.com/andylevy/ --- andylevy@bigfoot.com ------------------------------------------------------------- "I spilled spot remover on my dog. He's gone now..." --- Steve Wright -------------------------------------------------------------
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:32 EDT