Go a little bit higher on the exhaust side. .460-.470/.490-.510 worked
excellent on my dyno program. Keep the LS at around 110
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of DICEMAN469@aol.com
Sent: Thursday, September 14, 2000 7:01 PM
To: dakota-truck@buffnet.net
Subject: DML: Camshaft profile
What do you guys think of this.....270/270 duration .470/.470 lift and I
believe the lobe separation is 110 or 112.......you think this would be a
good camshaft for my 360?? I figured this coupled with a 2200 stall would
work pretty good.
-Austin
Vipertruck - "The Anti-Rice"
Supercharged 3.9L - 360 Work in progress
www.angelfire.com/ny/vipertruck
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:34 EDT