I would install the Accel coil at the same time as the MSD. Be sure
to get the adapter harness (p/n 140021AH) for the coil. It makes
installing the coil a lot easier. Also you can cut the Accel harness rather
than the factory wiring when you install the MSD. Check out the following
links:
http://www.intense99dak.com/msd.htm
- MSD (with universal harness p/n 8873) installation sheet
http://www.intense99dak.com/images/coil1.jpg
- a close-up of the Accel coil & harness before the MSD installation
Something you should upgrade at the same time is the spark plug wires.
The stock wires can't handle the MSD. Have fun ;-)
Chuck Robbins
'99 Intense Blue Dakota Sport
www.intense99dak.com
> Ron
>
> Thanks for the responses. Is it advisable to use the MSD 6A with the
stock
> coil or should I upgrade to the Accel ? (Bernd, I would appreciate your
> input as well)
>
> Thanks Guys
> Jay Friedrich
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:36 EDT
