Two ways:
(1) Use a Turkey Baster and remove all the fluid - Replace and repeat twice
to make sure that all the fluid is clean - Quick Clean Method
(2) Remove hose from bottom of pump (by the rack) and drain into a pan.
Start engine and run for NO MORE than 10 seconds to cycle the rest of the
fluid out. Replace with new fluid. (Proper way)
On both methods, you need to start the engine and turn the steering wheel
from lock to lock (Full turns from left to right) three or four times to
bleed the air out of the system. You'll know when the air is out when it
stops squeeling at both positions (Left or Right).
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Randall Brown
Sent: Sunday, September 17, 2000 12:48 AM
To: dakota-truck@buffnet.net
Subject: DML: OIL in powersteerin pump
How do i change this?
Thanks,
Randall Brown -- Dublin,Georgia
"94 CC SLT V8(318) 2x4 3.90 LSD 120,000miles
Dual out back w/3-chamber Flowmasters,
Drop-in K&N,Bilstein Shocks,Tinted windows,
Pioneer Cd Deck,Lakewood Traction Bars,
More to come
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:38 EDT