RE: Procress for Replacing Fuel Injectors

From: Bernd D. Ratsch (bernd@texas.net)
Date: Wed Sep 20 2000 - 22:48:35 EDT


Well, if you're a big strappin' redneck like Jon, of course you're gonna rip
the o-rings. ;) (Just teasin' ya Jon.)

30 minutes...that's all it takes without removing the TB.

- Bernd

-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Jon Smith
Sent: Wednesday, September 20, 2000 9:27 PM
To: dakota-truck@buffnet.net
Subject: DML: Re: RE: Procress for Replacing Fuel Injectors

you *can* get the rails off w/o moving the TB, but it's much easier to move
the TB then the rails... you also be less inclined to rip an injector O ring
_______________________
   Jon Smith--Raleigh, NC
        jon@fast4x4.net
       www.fast4x4.net

> The FSM says to remove the throttle body, but after looking
> at my truck today, I think this is a totally unnecessary step. Here is
> what my
> questions are:



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:42 EDT