You don't calculate, you measure. If you need to know the procedure, e-mail
me off net and I will send you detailed instructions.
Mark Kuzia
flyboy01@mediaone.net
http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 99.52 mph
360ci, 5-spd, 4.11 LS, Ram-air
----- Original Message -----
From: "Jon Smith" <jon@fast4x4.net>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, September 20, 2000 9:20 PM
Subject: DML: piston/valve clearence
> How does one calculate that? I'm going with the Crane 2030 cam, Hughes
> springs and retainers, Kammer and Kammer 1.7 RR's. What role does
milling
> the heads play in figguring that out as well?
>
> thanks
> _______________________
> Jon Smith--Raleigh, NC
> jon@fast4x4.net
> www.fast4x4.net
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:42 EDT