Yep, Flowmaster has a cat back system, I have it. Sound is excellent,
however performance is not, only 2 hp gain, and no TQ increase. Price was
good, 170 bucks. It was worth it for the sound, just disappointing on the
dyno.
__________________________________
Matt--VA--Y2K-HEMI `00 Sport Plus RC
4.7L 5spd. 9 1/4 3.92 LSD, Homemade air intake,
T-Bars, Spring clamps, Mobil 1,Hoosiers
3" Flowmaster cat-back,14.48 @ 92.40 MPH
209.9 RWHP/285 RWTQ
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>
-----Original Message-----
From: SEMIHEMI01@aol.com [mailto:SEMIHEMI01@aol.com]
Sent: Friday, September 22, 2000 7:56 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: Flowmaster
Nick,
I don't know about Flomaster but Gibson has a catback. I know on the
Quad
cab the 2000 and 2001 have the same part # and I'm betting the same holds
true for the CC. To make sure call your dealer's parts dept. and get them to
look up the part # for the 2000 and the 2001 and see if they have the same
part number. Then call Flowmaster or check their web site. Have a muffler
shop bend your pipes to fit with the Flowmaster. Go with a 3 inch outlet.
Man, don't cut anything under there. All the stock system is Stainless
Steel. Replace it but save the stock muffler and pipe as it is. Might want
to
replace and put back later. Stock replacement is over $400 at the dealer so,
don't cut it up.
SEMIHEMI01 (Bill C.) 2001 QC, 4.7L, 5spd. 3.55 LSD, K-N Cool-Air, SilBlades,
10w-30 MOBIL 1, 180 T'STAT
<A HREF="http://hometown.aol.com/semihemi01/">"THE DAK"</A>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:43 EDT