Check out the local junkyard for a on-board overhead system. A lot cheaper
than dealership.
-------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD, MCTSSA
MARCORSYSCOM, USMC
760-725-2506 (DSN 365-2506)
Work:mailto:stlaurents@mctssa.usmc.mil
Home:mailto:saint1958@home.com
-----Original Message-----
From: David A [mailto:dodgedakotaquadcab@hotmail.com]
Sent: Sunday, September 24, 2000 5:26 AM
To: dakota-truck@buffnet.net
Subject: DML: Re: K&N Home Brew...
I assume you are talking about the Overhead Console on the Dakota.
My 2000 QC doesnt have one of those..
When i install the "Home Brew" system,what else do i need to do??
Help?
David Digney
2000 QC
3.9 V6,42LE
>From: "Alex Harris" <aharris@signcast.com>
>Reply-To: dakota-truck@buffnet.net
>To: <dakota-truck@buffnet.net>
>Subject: DML: RE: Re: FAMB installed today [reset computer?]
>Date: Sun, 24 Sep 2000 01:15:10 -0500
>
>I didn't reset the computer when I installed my homebrew K&N this week...
>should I do that? For some reason I didn't think it was necessary.
>
>- Alex
>
>
> > > I put in the Edelbrock can with 2.5 inch x 10 inch K&N Filter on my 98
> > 5.2L
> > > DAK. I've read that the ECU (PCM, whatever) has to relearn its
> > environment,
> > > particularly air/fuel ratio.
> > >
> > > What do I have to do to make this happen?
> >
> > You need to reset the computer. Just unbolt the negative cable/terminal
> > from the battery, turn the key over, and hold the key over for 15-20
> > seconds; this will bleed the computer of the stored info so it
> > can start to
> > relearn with the new modification.
> > Kyle
> > 93 Dakota 4x4 V6
> >
>
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:46 EDT