I got the Taylor be careful when you remove them.
If they are the same as mine they do not have the same
type of boot at the spark plug end as the original
equipment.
If you still have the metal sleave around the spark
plug, FIRST remove the metal sleave from the block,
slide them back over the wire, then grab the spark
plug wire boot and remove from the plug.
--- "mike d." <miggitymike@juno.com> wrote:
> Try Taylor. I got some for da'Project in blue and
> they were under $40.
> They make em' in a custom-fit set for daks. I got
> em' from Summit. They
> DO come in Red =)
>
> -miggity
>
> miggitymike@juno.com
> PROJECT 13's ---> slammed 88 Dakota w/360 swap in
> progress!
>
> http://surf.to/Project13s
>
>
> On Mon, 25 Sep 2000 18:54:25 -0400 AlexReed
> <alexreed@home.com> writes:
> > I want to upgrade my wires and plugs, I want red
> wires that will hold
> > up
> > to the temp. and will last the long haul. I
> checked Accell and they
> > have
> > them, execpt that I need straight plug boots cause
> the metal
> > sleeves.
> > What other co. makes them in the same $50 price
> range? With my '99
> > 318
> > what plug would be best? Please Bernd, Ron someone
> help!
> >
> > Alex R. -- Getting for the Hot Rod power fest.
> >
>
>
________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk! For your FREE
> software, visit:
> http://dl.www.juno.com/get/tagj.
=====
2000 Quad Cab 4X4-Sport V-6 Automatic Sports Plus Package
31X10.5 tires Limited Slip 3.55 Trailer Tow Group
HD Package Skid Plates Added:Airaid air filter,Flowmaster 3 chamber,
Steel Horse Torneau cover, Autolite Double Platinum Spark Plugs,
Removed air horns from Throttle Boddy, added new TB bolts,
Cool Tape around air filter and A/C tubes
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:50 EDT