Re: RE: New FMS Injectors Arrived

From: SEMIHEMI01@aol.com
Date: Wed Sep 27 2000 - 07:05:17 EDT


Kyle,
    Use motor oil>> ALSO> clean the holes in the ports and fuel rails good. I
used a clean rag with fuel injector cleaner to remove any deposits that have
formed over time. Then use a clean rag with a little oil on it to lube the
holes too. Lube the injector "O" Rings and install them.

SEMIHEMI01 (Bill C.) 2001 QC, 4.7L, 5spd. 3.55 LSD, K-N Cool-Air, SilBlades,
10w-30 MOBIL 1, 180 T'STAT
<A HREF="http://hometown.aol.com/semihemi01/">"THE DAK"</A>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:54:53 EDT