Attention DML'ers,
Those that are following my instructions, please be careful. In the wording
of the instructions regarding the power leads for the MSD, be sure your
large black wire goes to ground. Any frame ground is good, just make sure
you have a good metal-metal contact as DC paints some surfaces. In some of
my instructions I may have pointed to the connection in the junction box.
As Bernd has stated, this is also a hot lead, NOT a ground lead. My profuse
apologies.
1) big red wire from MSD can go to junction box positive battery lead
2) big black wire goes to GROUND.
Again my apologies.
Ron
00 SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:06 EDT