Tom:
Which tranny do you have?
Thanks!
Richard
On Sat, 30 Sep 2000 20:18:13 EDT TommFern@aol.com writes:
> I went through 2 Pro Torque/Level 10 2,400-2,700 stall converters
> before
> I gave up hope.
> I say good luck in getting ANY stall out of them.
> I don't know if it's the electronic lockup, or the computer, or
> what...they just don't seem to stall at all.
>
> Alan S.
> >>
> Sorry to here that Alan. I have a precision industries "Viper" TQ.
> It stalls
> around 3600-3700. It retains the lock up. It is by far the best TQ
> I've ever
> used.(had 2 before it). THe driveability is superb. In normal
> driving
> sitiuations, I hardly know it's there. I'm running more stall than I
> used to
> with better driveability. The torque multiplication is higher(2.5 vs
> stock
> 1.8). It hits soo hard. This why I feel I ETd so well. It's good for
> like
> 1200hp. It is pricey,however. But I wouldn't give mine up! These are
> custom
> billet converters with any stall you want. If a second stall change
> is
> needed, it's free.
> Tom-no longer cringes when he hits the juice. :)
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:44 EDT