What should i be doing service wise to my Quad Cab...?
>From: "Ronald Wong" <ron-wong@home.com>
>Reply-To: dakota-truck@buffnet.net
>To: <dakota-truck@buffnet.net>
>Subject: RE: DML: RE: Top Speed of the 2000
>Date: Mon, 2 Oct 2000 11:14:25 -0700
>
>That's because the data length for the speed limiter is one byte. If you
>go
>to 255 the number goes negative. Actually if you got your truck going that
>speed you'd go negative too.
>
>Ron
>00 SLT QC 4X2 5.9 46RE 3.92 LSD
>For modifications see my DML Profile
>
>-----Original Message-----
>From: owner-dakota-truck@buffnet.net
>[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Barret, Matt
>Sent: Monday, October 02, 2000 10:20 AM
>To: 'dakota-truck@buffnet.net'
>Subject: RE: DML: RE: Top Speed of the 2000
>
>
>We're talking about 2 different animals here I think, 5.9 is 4800, 4.7L is,
>well, unknown, I've gone to 6000 rpms and not hit it yet??? might be a
>slight error in the factory tach.
>BTW, Mike Leach Co. tells me that the speed limiter has a maximum numeric
>value of 254, thats as high as it can be set. I guess that'll be ok ;)
>
>Matt
>
>-----Original Message-----
>
><>From: Stlaurent Mr Steven [mailto:STLAURENTS@mctssa.usmc.mil]
><Sent: Monday, October 02, 2000 12:57 PM
><To: 'dakota-truck@buffnet.net'
><Subject: RE: DML: RE: Top Speed of the 2000
>
>
><<It is 6000 when you run an automatic through the gears manually. >>
>
>-------------------------------------------
>Steven St.Laurent
>Test Engineer
>Test Branch, GSD, MCTSSA
>MARCORSYSCOM, USMC
>760-725-2506 (DSN 365-2506)
>Work:mailto:stlaurents@mctssa.usmc.mil
>Home:mailto:saint1958@home.com
>
>
> -----Original Message-----
>From: Ronald Wong [mailto:ron-wong@home.com]
>Sent: Monday, October 02, 2000 9:40 AM
>To: dakota-truck@buffnet.net
>Subject: RE: DML: RE: Top Speed of the 2000
>
>Nope, two separate things from what I could tell. RPM limiter on a stock
>PCM is 4800, speed limiter is around 115 mph. HP PCM RPM limiter is 5200
>and
>speed limiter is....UP UP and AWAY!
>
>Ron
>00 SLT QC 4X2 5.9 46RE 3.92 LSD
>For modifications see my DML Profile
>
>-----Original Message-----
>From: owner-dakota-truck@buffnet.net
>[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Marty Galyean
>Sent: Monday, October 02, 2000 8:37 AM
>To: dakota-truck@buffnet.net
>Subject: Re: DML: RE: Top Speed of the 2000
>
>
>My experience is that its more of an rpm limiter than a speed limiter but
>that it takes both rpm and speed into account.
>I can get 110+ if I ease it up there and stay out of the high rpms, but if
>I'm kicking it it cuts out mid 90s.
>
>Maybe mine is broke. Anyone else's behave like this?
>
>Regards,
>Marty
>
>Ronald Wong wrote:
>
> > Hmmmm...that's rather a low limit. Maybe for 4.7's but mine was at
> > 115....until I put the HP PCM in.
> >
> > Ron
> > 00 SLT QC 4X2 5.9 46RE 3.92 LSD
> > For modifications see my DML Profile
> >
> > -----Original Message-----
> > From: owner-dakota-truck@buffnet.net
> > [mailto:owner-dakota-truck@buffnet.net]On Behalf Of MALDBNSF@aol.com
> > Sent: Monday, October 02, 2000 12:02 AM
> > To: dakota-truck@buffnet.net
> > Subject: DML: Top Speed of the 2000
> >
> > I just had my Y2K QC up to 97mph and the computer would
> > limit it there. Is this about the right top speed limt on the Y2K's? The
> > 4.7L still had power to give as it was cutting out on me.
> >
> > Don Mallett
> > geocities.com
>
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:46 EDT