I have heard of people using a "Reverse Shacle" setup to lower 2wd's, but I've only owned
4wd's...
-Mike Brown
Pasadena, MD.
97-Dakota Club Cab,5.2L, 4X4, 7" Lift, 35"x12.50" BFG A/T.
http://www.geocities.com/mbrowwwn/index.html
-----Original Message-----
From: ABeerCan@aol.com [mailto:ABeerCan@aol.com]
Sent: Wednesday, October 04, 2000 12:27 PM
To: dakota-truck@buffnet.net
Subject: DML: Rear Shackle
This is a crazy idea that I have, but, on the 4x4 version of the Dak's, the
rear hanger is mounted to place the shackle above it and the shakle is also
like that. Could I use the rear hanger and shackle to replace the ones on my
two wheel drive to lower it some? I am looking for a cheap and easy way to
go. I know that I could use aftermarket hangers and shackles, but I can get
the factory 4x4 ones for around 20 bucks and grab some grade 8 bolts for
cheap since a friend works at a local hardware store (aka, free!).
Will
96 Dakota Cylindrically Challenged (nowhere near anemic) V-6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:48 EDT