The guys at Hughes reccomended that cam based on the combunation I had.
Ported heads are a must (bowl-ported at least). And I meant to type 14.7Hg,
not 1.7.
Mark Kuzia
flyboy01@mediaone.net
http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 102.45 mph
360ci, 5-spd, 4.11 LS, Cowl-induction
----- Original Message -----
From: <Gmblows@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Sunday, October 08, 2000 10:00 AM
Subject: Re: DML: Anyone doing a 360 swap, please read! Important info.
> I just checked out your page, wow that answered most of my questions.
> Is that 17 inches @ stock idle speed? That's good.
> Do you think that would be to much cam for unported heads?
>
> << Yes it is an 1824.
> Stock pistons (for now)
> 1.5 ratio Crane Energizer rockers
> 1.7 vaccuum at idle.
>
> Mark Kuzia
> flyboy01@mediaone.net
> http://people.mw.mediaone.net/flyboy01/home.html
> 1995 Dakota 13.79 @ 102.45 mph
> 360ci, 5-spd, 4.11 LS, Cowl-induction
> >>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:54 EDT