Re: Anyone doing a 360 swap, please read! Important info.

From: Mark Kuzia (flyboy01@mediaone.net)
Date: Mon Oct 09 2000 - 22:28:51 EDT


220/225, .497 lift (w/1.5 rocker)

Mark Kuzia
flyboy01@mediaone.net
http://people.mw.mediaone.net/flyboy01/home.html
1995 Dakota 13.79 @ 102.45 mph
360ci, 5-spd, 4.11 LS, Cowl-induction

----- Original Message -----
From: <TommFern@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Monday, October 09, 2000 7:05 PM
Subject: Re: DML: Anyone doing a 360 swap, please read! Important info.

> In a message dated 10/8/00 7:25:30 PM Pacific Daylight Time,
> flyboy01@mediaone.net writes:
>
> << How have you modified your FI to make it work?
> >>
> Nope, in fact I think I might just go one bigger. I'm told the EFI needs
to
> see 10" of vacuum to work. My buddy runs a 227/235 cam on a 112 with 560
lift
> ona stock 318 shortblock. He pulls 9.5" of vacuum with an occasional
> backfire,but no stalling or fouling of plugs. That being the case,how much
> more can
> a higher compr. 360 pull on a 114? What was your cam specs again,Mark?
> Tom



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:55:55 EDT