Ah...thought you meant the actual TB bolts as well. (You're right on the
air-hat bolt.)
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
To: dakota-truck@buffnet.net
Subject: Re: DML: Add ons, Help me some guys!
The hole for the air hat bolt is in the horn.
"Bernd D. Ratsch" wrote:
>
> No you don't. The screw holes are at the surface level of the throttle
body
> top...not at the airhorn level.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> Subject: Re: DML: Add ons, Help me some guys!
>
> TB for sure. You've got a good exhaust system, but you need to get air
> moving IN as well as OUT to make power. And ignition system won't do
> this.
>
> You can take the horns off, but to complete the job you'll have to
> remove the part where the air hat hold-down bolt screws into, and thus
> will need a longer bolt. Taking the horns down won't give you a big
> boost, though; you really need to open and clean up the bores.
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:20 EDT