I think, actually, that seal works the other way around. Change 'em, Alex,
it only takes a few minutes.
Ron
00 SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Alex Harris
Sent: Thursday, October 26, 2000 7:16 AM
To: dakota-truck@buffnet.net
Subject: DML: RE: Re: Removing Spark plugs Tonight..HELP!!!!!!
I don't know if it matters (probably not), but I put the wide side out so it
seats against the head. In my little brain I'm thinking "more flat gasket
area = better seal."
- Alex/StL
> This may be trivial, but - when you put the little metal gasket
> on the plug, which way do you put it? The gasket has two layers, and one
> side is slightly larger in diameter than the other side. On the stock
> champion plugs that came out of my V6, the gasket had two layers and both
> are exactly the same diameter. Does it make any difference which way they
> go on?
>
> - Kevin D.
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:26 EDT