But electricity goes from center electrode to ground electrode.
Ron
00 SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of jay & dana
Sent: Thursday, October 26, 2000 5:17 PM
To: dakota-truck@buffnet.net
Subject: DML: Re: RE: Re: RE: Platinum Plugs with MSD and Boost?
The regular Bosch platinum plugs don't have platinum tips, the center
electrode is 99.?% platinum. So there for no platinum tips, no flaking off.
The ground electrode is not platinum. Or am I mistaken here.
Jay
-----Original Message-----
From: Bernd D. Ratsch <bernd@texas.net>
To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
Date: Wednesday, October 25, 2000 10:27 PM
Subject: DML: RE: Re: RE: Platinum Plugs with MSD and Boost?
>
>Call them up and the techs will tell you "NO" everytime. They also wear
out
>too soon due to the Platinum "Tips" flaking and i've seen mis-fires with
>Platinum plugs and MSD Ignitions as well.
>
>Stick with the Autolites.
>
>- Bernd
>
>
>-----Original Message-----
>From: owner-dakota-truck@buffnet.net
>[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Tim Berry
>Sent: Wednesday, October 25, 2000 10:52 PM
>To: dakota-truck@buffnet.net
>Subject: DML: Re: RE: Platinum Plugs with MSD and Boost?
>
>On the MSD 6A instructions, it states "...MSD does not recomend which plug
>or gap is recomended for your application..."
>What is the reason for not using a platnum, just curious... (I have the
>Autolite 3922's now, so dont worry =-)
>*-=-=-=-=-=-=-=-=-=-=-=-=-*
>Tim Berry (97 Dakota Club Cab)
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:56:27 EDT