Re: RE: Autolite 3923 gap question (Thanks Ron and Bernd)

From: Mike's Dakota (mikesdakota@home.com)
Date: Wed Nov 08 2000 - 12:40:53 EST


Thanks for the help on that. What is the MSD part# on the SS coil? I
looked at Summit and cant find a listing is it the MSD #8207? Found it at
Carparts.com for 43.00.
----- Original Message -----
From: "Ronald Wong" <ron-wong@home.com>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, November 08, 2000 10:24 AM
Subject: DML: RE: Autolite 3923 gap question

> .040 is fine for now. .050 when you use MSD Blaster SS coil. The king
> (mastermind) would be Bernd.
>
> Ron
> 00 SLT QC 4X2 5.9 46RE 3.92 LSD
> For modifications see my DML Profile
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of Mike's Dakota
> Sent: Wednesday, November 08, 2000 9:17 AM
> To: Dakota Post Message
> Subject: DML: Autolite 3923 gap question
>
>
> OK guys, you all know a hell of allot more than any dealers out there.
Just
> a quick question. I am getting ready to install my Autolite 3923s in my
> truck today and need to know what to gap them at. The catalyst sticker
says
> .040, I have a Mopar performance PCM, and a Mopar Cold Air intake
installed.
> Should I still keep the gap at .040 or should I gap them differently? If
I
> install a MSD-6a and/or a coil would I gap them differently? Thanks in
> advance for your help.
>
> PS Who is the mastermind of the Autolite 3923 plug conversion?
>
>
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:10 EDT