At 12:36 AM 11/19/00 -0600, you wrote:
>You couldn't find anywhere on the fuel rail?
>- Bernd
I did not want to drill into the rail so I detached
the braided line from the rail (driver's side on the
5.2L), found a fitting which would attached to the rail
(hardest part) where the braided hose attached, found
a T-connector which was attached to the previous one,
attached the sender unit and the original braided
hose to the T. I then ran the electrical wires through
the firewall to the supplied 'memory' box which I put
under the dash between the emergency brake and hood
releases.
Bob
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:57:28 EDT