OK, but I'll have to buy a Powerdyne first. LOL :)
-Ryan
99 DA RC R/T
Hehehe.
----- Original Message -----
From: Bernd D. Ratsch <bernd@texas.net>
To: <dakota-truck@BUFFNET.NET>
Sent: Sunday, December 17, 2000 12:50 AM
Subject: DML: Re: Att Charles Smith, Tim berry,L vs r/t
>
> Or...just install the Goodyear "GatorBack" belt and don't worry about
> slipping. Don't believe me? Buy one, adjust the belt "snug"...not with a
> hammer...and start the engine...rev it as high as you want...it won't
slip.
> (It's the design of the ribs.)
>
> Total Cost: $25 max.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@BUFFNET.NET
> Subject: DML: Re: Re: Re: Re: Att Charles Smith, Tim berry,L vs r/t
>
> Hehe, all you can do is try. LOL Seriously, on the SC, you runnin' the
> 9lber? There is a 7rib pulley they are selling for PDs over on the RTML
for
> PDs that stop slippage and gain a bit in the 1/4. Ya might wanna check it
> out.
>
> -Ryan
> 99 DA RC R/T
> Go until it blows......hehehe
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:01 EDT