OK,
Thanks for the suggestion, Bob. I'll regap them this afternoon.
Hugh
----- Original Message -----
From: "Bob Tom" <tigers@bserv.com>
To: <dakota-truck@buffnet.net>
Sent: Saturday, December 16, 2000 8:56 PM
Subject: Re: DML: Correct Idle rate?
> At 03:27 PM 12/16/00 -0500, you wrote:
> >Plug gap is 45/1000 and the idle is about the same as before any mods.
> >I would say no more change in RPMs than 25-50 revs. <snip>
>
> Hugh
>
> If you're running with the stock coil, the .045 gap may be a bit too much
> and causing a miss. You might to try a .040 gap. I had a faint miss near
> 5000 rpm at WOT with the 3923s. I thought it might have been the Accel
> Supercoil at first but I found one plug that was gapped beyond the .035
> that I set the others to.
>
> Bob
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:02 EDT