Bernd
How any ounces would you say, 1 or 2 ?
Thanks for the info.
Patrick O'Day
----- Original Message -----
From: "Bernd D. Ratsch" <fasstdak@swbell.net>
To: <dakota-truck@buffnet.net>
Sent: Sunday, January 07, 2001 5:30 PM
Subject: RE: DML: Removing carbon build up??
>
> Sorry Patrick...in this case you're wrong.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@BUFFNET.NET
> Subject: Re: DML: Re: RE: Removing carbon build up??
>
> I just used 12 oz/30 secs as an arbitrary figure to illustrate to Chris
the
> difference beween trickling water into the tb versus letting an in-fender
> air intake suck as much water as it can. My point is still valid(even more
> so with your 8 oz/2 min flowrate).
> Patrick Delgado
>
> >
> > What?!? Where'd you come up with 30 seconds? This is done over a period
> of
> > close to two minutes.
> >
> > If you're saying that this breaks engines...Yeah...right. You don't
POUR
> > it...you trickle it down. (And you don't pour the whole cup down at
once
> > either.)
> >
> > - Bernd
> >
> > -----Original Message-----
> > From: owner-dakota-truck@BUFFNET.NET
> > Subject: Re: DML: Re: RE: Removing carbon build up??
> >
> > (12 oz water/30 secs) X (1 gal/128 oz) X (7.8 gal/ 1 cu ft) = a tiny bit
> > 2000 cc displacement X (5000 revolutions/1 minute) =
a(engine-busting)lot
> > Patrick Delgado
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:31 EDT