it is a 5.2 v8,question when you say kit do you mean with the guide plates
and pushrods
-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Bernd D. Ratsch
Sent: Saturday, January 20, 2001 7:01 PM
To: dakota-truck@buffnet.net
Subject: DML: RE: Crower Rollerized Rocker Arms - Gibson stainless
headers
Excellent choice on the Crower Set. (Make sure you get the kit and not just
the rocker arms - applies to V8 only). You'll probably also need slightly
taller valve covers so grab the Mopar Performance set as well. (Again,
applies to V8 only)
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of aaron
Sent: Saturday, January 20, 2001 6:38 PM
To: dakota-truck@buffnet.net
Subject: DML: Crower Rollerized Rocker Arms - Gibson stainless headers
I am thinking about installing Crower Rollerized Rocker Arms 1.7:1 ,and
Gibson stainless headers and was looking for input on these products. The
truck has under drive pulleys , K&N intake , cat back,MSD blaster, Jet
chip,MPI TB (he does great work),8.8 wires & a trac-lock that is still on
the bench.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:39 EDT