Hi Frank,
I'm going to have them pressure tested first to make sure there are no
cracks. Then I'm going to port and polish them myself. Once I get this
done, they are going back to the shop for the 3-angle cut on the heads, and
a back cut on the valves. Possibly a slight mill also.
When I get the DAK back together, I'm going to see if my dealer is ready to
anty up for another tranny. After that, I'm going to go synthetic on the
tranny and rear-end, and head up your way for the 'ol dyno test again. (I'd
love to pull 300 ponies this time around.) I'll let you know when the time
comes. I guess after that, it will be Carlisle time again.
Rich
-----Original Message-----
From: frank golembieski [mailto:editzero@yahoo.com]
Sent: Saturday, January 27, 2001 12:27 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: Success: Head Removal
Hey Rich are you going to get any porting done on them
or just the 3 ang valve job
=====
Frank G
http://members.onecenter.com/autoworld/dakota/index.html
Mopar or no truck
__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - Buy the things you want at great prices.
http://auctions.yahoo.com/
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:58:44 EDT