> Kyle, I may have missed this earlier but does this happen when the engine
is hot
> or cold? Have you checked the plug wires, including the one from the coil
to the
> distributor cap? When you did/do give them a good tug and twist them
around when
> you're measuring the resistance. Just some thoughts.
It happens both when the truck is cold as well as when it is warm. I thought
I also had a bad plug wire, so I swapped in an older set I have, which didnt
help out at all. I put the MSD Super Conductors back on and the problem
still exists. I did test the wires and the ohm/resistance reading is what
they should be. The truck did act tonight after having a good solid 2 days
of running great.
Kyle
93 Dakota 4x4 V6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:07 EDT