What size push-in clips? I need to do the same thing.
----- Original Message -----
From: "Kevin L. Miller" <kmrcdd@swbell.net>
To: "DML" <dakota-truck@buffnet.net>
Sent: Saturday, February 03, 2001 6:00 PM
Subject: DML: cowl panel -short TG
> Just another tip I came up with today...The cowl panel under the front of
> the truck with the little round door to open & reach the oil filter on the
> 4.7.
> I hate the oil running down & dripping on this panel when changing the
oil.
> but the clips that hold the panel in are a pain to get ahold of & pry out,
&
> after a couple times they're shot...Went to Lowes & found push-in clips
> (seen these type on interior panels) that have a center pin. pull the
center
> pin out & the clip pops right out. push the clip in & insert the pin -
holds
> tight.....what a lifesaver.
>
> kmrcdd@swbell.net
> Kevin
> 2000 4x4 QC 4.7L auto SLT+ 3.55 LSD Skids ,K&N, MAAP Nerfs, SS bedrails
> Catch-alls, Deflectors, White/Silver 180 TS, Bosch 4418 +4 Mobil-1
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:08 EDT