RE: Auto Tranny Question

From: Ronald Wong (ron-wong@home.com)
Date: Fri Feb 09 2001 - 10:33:16 EST


Or you can buy a custom valve body for $375.

Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY

-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Bob Tom
Sent: Friday, February 09, 2001 6:01 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: Auto Tranny Question

At 01:03 PM 2/8/01 -0800, you wrote:
>Ok, I know this has probably been covered before, but I'm a "stick" guy and
>don't usually pay attention to "auto" stuff. Well, I now own another truck
>that is an auto. I'd like to install a shift kit. Is this something I can
>install at home? Where do they go? How do they work? Any help for an
>annemic new "auto" owner would be appreciated.
>Thanks, Rich - Ashburn, VA

Should be a piece of cake for you, Rich, after all the work that you do in
your
engine. Downside is being on your back for lengthy periods ... involves
removing valve body (watch out for dropping balls), drilling some larger
holes,
maybe replacing a couple of parts (accumulator, spring, balls, etc.).

If you get a Transgo kit, I gather instructions and install video are good.
A few on the list have done their own ... maybe they can give more details.

Bob



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:12 EDT