Cam Position Sensor. You have one.
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of jay & dana
Sent: Saturday, February 10, 2001 1:48 PM
To: dakota-truck@buffnet.net
Subject: DML: Re: Truck Stalling Update Part IV Attn: Kyle
Hi Kyle
This magnetic pick-up coil assembly you are referring to, does it fit in the
distributor, like maybe under the cap? What is the purpose of this part?
Maybe I don't have one on my 97, 318, or do I?
TIA
Jay
I then turned my attention to the
>distributor, putting on a new NAPA dist. cap, NAPA rotor, and a 'magnetic
>pickup assembly coil; which I bought from Autozone for $38. The magnetic
>pickup coil was extremely easy to replace, and I had all three parts off
and
>the new ones back on within 15 minutes.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:12 EDT