yea i welded mine made it in to a clock and its powder coated/ronnie
----- Original Message -----
From: "A. S." <adakota4x4@hotmail.com>
To: <dakota-truck@buffnet.net>
Sent: Friday, February 16, 2001 6:26 PM
Subject: DML: Re: attn: Ronnie was:Timing Chain - UPDATE!
> Can't hold off on the install. I've set aside time to do it this weekend,
> so it has to be done. Time is short anymore. As for the old parts,
haven't
> given much thought to them. Guess I'll keep them. Did you want them for
> some reason? We will have to get together over the summer though.
> --Aaron--
> 95 DSRC 4x4 V6
> www.geocities.com/adakota4x4_95/
>
>
> >From: "R\\A Chapman" <rchapman@iserv.net>
> >Reply-To: dakota-truck@buffnet.net
> >To: <dakota-truck@buffnet.net>
> >Subject: DML: Re: attn: Ronnie was:Timing Chain - UPDATE!
> >Date: Fri, 16 Feb 2001 11:35:08 -0500
> >
> >yea ive got more info just dont know if your ready ,air tools the best
way
> >for the crank pulley on and off the clutch fan takes a special tool for
> >removel but a small pipe wrench works just fine ill have to pass on your
> >invite this time im already going on a road trip hold off on this
install
> >untill july and ill be down if you have any really bad problems just call
> >me
> >have you got any ideas on the use of the old parts? see yea /ronnie
> >----- Original Message -----
> >From: "A. S." <adakota4x4@hotmail.com>
> >To: <dakota-truck@buffnet.net>
> >Sent: Friday, February 16, 2001 12:31 PM
> >Subject: DML: attn: Ronnie was:Timing Chain - UPDATE!
> >
> >
> > > Well, it's about time you said something Ronnie. :) Got any other
> >advice
> >on
> > > the install? Or perhaps you would like to take a lovely vacation down
> >to
> > > Kentucky and help me make the install. Me and the old lady will put
our
> > > shoes back on and clean up the outhouse if you want to stay a while.
:)
> >We
> > > might even get into grandad's moonshine once the work is done.
> > > --Aaron--
> > > 95 DSRC 4x4 V6
> > > www.geocities.com/adakota4x4_95/
> > >
> > >
> > > >From: "R\\A Chapman" <rchapman@iserv.net>
> > > >Reply-To: dakota-truck@buffnet.net
> > > >To: <dakota-truck@buffnet.net>
> > > >Subject: Re: DML: RE: Re: Timing Chain - UPDATE!
> > > >Date: Thu, 15 Feb 2001 19:11:54 -0500
> > > >
> > > >that tensioner fits damm tight ihave the proof i put on in mine and
> >when
> > > >you
> > > >do yours the crank pulley is metric/ronnie
> > > >----- Original Message -----
> > > >From: "A. S." <adakota4x4@hotmail.com>
> > > >To: <dakota-truck@buffnet.net>
> > > >Sent: Thursday, February 15, 2001 12:16 PM
> > > >Subject: Re: DML: RE: Re: Timing Chain - UPDATE!
> > > >
> > > >
> > > > > I called the guy that sold me the parts. He said that the V8 does
> >have
> > > >the
> > > > > tensioner. Jon, maybe we're not one the same page as to what
we're
> > > >calling
> > > > > the 'tensioner'. It's basically a fairly big piece that bolts
> >behind
> > > >the
> > > > > chain. On the left side, there is what looks to be a piece of
> >spring
> > > >steel
> > > > > and plastic (I think plastic, don't have it in front of me).
> >Anyway,
> > > >this
> > > > > piece runs on the outside of the chain...like a guide. I doubt
that
> > > >it's
> > > > > constantly touching, but must sit pretty close. Got anything like
> >that
> > > >on
> > > > > your dak? Guess the guy could be wrong...but he's been the most
> > > > > knowledgeable guy at a dealership I've talked with.
> > > > > --Aaron--
> > > > > 95 DSRC 4x4 V6
> > > > > ww.geocities.com/adakota4x4_95/
> > > > >
> > > > >
> > > > > >From: "Jon Smith" <jon@fast4x4.net>
> > > > > >Reply-To: dakota-truck@buffnet.net
> > > > > >To: <dakota-truck@buffnet.net>
> > > > > >Subject: DML: RE: Re: Timing Chain - UPDATE!
> > > > > >Date: Wed, 14 Feb 2001 21:43:06 -0500
> > > > > >
> > > > > >The tensioner is a v6 item only...
> > > > > >
> > > > > >______________________
> > > > > >Jon Smith--Raleigh, NC
> > > > > > www.fast4x4.net
> > > > > > jon@fast4x4.net
> > > > > >ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
> > > > > >
> > > > > >
> > > > > >-Hi Guys
> > > > > >-
> > > > > >-Do our 318, V8's also have this tensioner (97 + ), or is it
just
> > > > > >-a V6 thing
> > > > > >-(not that I'm putting down V6's)?
> > > > > >-
> > > > > >-Thanks
> > > > > >-Jay
> > > > > >-
> > > > > >- He has everything I need...dbl-roller chain & sprockets,
> >tensioner,
> > > > > >-gaskets, seal. (Yes the
> > > > > >->double roller works with the tensioner) Grand total: $93 and
> >some
> > > > > >change.
> > > > > >-
> > > > > >-
> > > > > >-
> > > > > >
> > > > >
> > > > > _________________________________________________________________
> > > > > Get your FREE download of MSN Explorer at http://explorer.msn.com
> > > > >
> > > >
> > >
> > > _________________________________________________________________
> > > Get your FREE download of MSN Explorer at http://explorer.msn.com
> > >
> >
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:18 EDT