I have the CDT components...they are very good quality...e-mail me off line,
I might be able to get you a good deal...
----- Original Message -----
From: Jason&Sarah <Jpm699@email.msn.com>
To: <dakota-truck@buffnet.net>
Sent: Thursday, February 22, 2001 1:38 AM
Subject: Re: DML: Car Audio, decision made
Well I was just informed that autotoys is out of the MB Quart component
speakers that I ordered. And seeing as they were thier discountinued line,
there won't be anymore.
So out of the following brands who makes the best 6.5" component speakers
and what is the model line or number. How do you feel about the other brands
listed?
Rockford Fosgate
Pioneer
Infinity
Blaupunkt
CDT
Jason
>
> > Okay... Let's start off with HOW TO...
> >
> > Doors.
> >
> > -there are about 2 nuts that hold the bottom piece on.
> > -one nut near the side mirrors.
> > -two TORX bit heads, one easily visible by the door handle and the other
> is
> > BEHIND the door handle. Open the handle, look into the space behind it
> and
> > you'll see a well hidden screw.
> >
> > with those screws removed. give it a nice tug upwards holding the door
> > handle. Disconnect ur door handle bracket. Reach behind the plastic
clip
> > for the power windows (if you have it) and push the clip on the bottom
and
> > top. That should let you turn the whole piece sideways and push back
> > through the hole. Remember to disconnect other electrical components
like
> > maybe power windows. etc.
> >
> > ***AH, one more thing you'll need. speaker ADAPTORS. the factory
> speakers
> > have a plastic trim ring around the back of it to space the speaker out.
> > ADAPTORS From 6.5S to 6.5 SPEAKERS can be bought at C.C. to space the
> > speaker out and have the correct mounting holes for it. If you want to
> save
> > $, skip it, have a drill handy, mark and drill some new holes for the
> > speaker. Also watch the magnet depth for it can hit ur window if you
roll
> > it down too far without the spacer.
> >
> > the dash ****
> > Simple. Grab from the top, PULL. there are clips around that hold it
in.
> > watch out for electrical wiring, maybe a foglight switch or something
> hooked
> > up. after that's out, 2-10mm bolts and the cd/cass slides right out
> >
> > the rear speakers are a pain. (do you have a CC? if so, e-mail me and
> I'll
> > give you pointers on what to do)
> >
> > Hope that helps. To answer ur question on the stock speaker wire.
Leave
> > it. It's fine. Not worth replacing...
> > -Chuong
> >
> >
> > <<
> > This is my first stereo install ever and could use any information you
can
> > give me, especially 97-00 dak specific.
> >
> > Jason
> > 98 CC SLT 4X4
> >
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at http://explorer.msn.com
> >
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:23 EDT