Thanks for the info, the service manual did not mention that. At any rate, I
hope to get an M1 before the pans goes again, I got a little over 10,000
miles with the blower before it let go. It wasn't a fun job and I'm not
looking forward to doing that again. Any reason not to use studs or a higher
grade bolt?
Wayne
> you cannot (should not) resue them.. They are a "torque to yield" bolt,
> meaning they stretch a certain amount when torqued down.
>
> ______________________
> Jon Smith--Raleigh, NC
> www.fast4x4.net
> jon@fast4x4.net
> ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
>
>
> -
> -This is a little late, as I already replaced the belly pan gasket,
> -but I read
> -a post stating that you can't reuse the intake bolts. Does anyone know if
> -this is true and if so, why?
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:29 EDT