Early controllers will allow you to use the 310 CC injectors. Controllers after about mid 95 will trigger a fault (fuel map
out of range). Depends on the software Rev level.
TommFern@aol.com on 02/27/2001 03:29:00 PM
To: dakota-truck@BUFFNET.NET@Internet
cc: (bcc: Frank T Holloway/CA/KAIPERM)
Subject: Re: DML: Changing Injector Size (Bernd)
In a message dated 2/27/01 12:18:29 PM Pacific Standard Time, bernd@texas.net
writes:
<<
If you're going to run with anything larger than the 24#, you will need to
have
the PCM reprogrammed.
>>
What's your thinking here, Bernd. I have run 24s then 30s and have had for a
time 36s in. All seemed to work fine. The 36s just made it a little too rich.
This was done through the MP PCM
Tom
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:33 EDT