Long Term/Short Term Fuel Trim and Pulse Width. 24# work just fine with the
stock PCM's. I've tried 30# (not on my truck) and they ran way too rich.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of TommFern@aol.com
Sent: Tuesday, February 27, 2001 5:25 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: Changing Injector Size (Bernd)
In a message dated 2/27/01 12:18:29 PM Pacific Standard Time,
bernd@texas.net
writes:
<<
If you're going to run with anything larger than the 24#, you will need to
have
the PCM reprogrammed.
>>
What's your thinking here, Bernd. I have run 24s then 30s and have had for a
time 36s in. All seemed to work fine. The 36s just made it a little too
rich.
This was done through the MP PCM
Tom
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:33 EDT