If you can create a valley pan and run it direct, you will some serious
bottom end response.
--------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD, MCTSSA
MARCORSYSCOM, USMC
(Work) 760-725-2506 (DSN: 365)
(Work) mailto:stlaurents@mctssa.usmc.mil
(Home) mailto:saint1958@home.com
"In fact, my work has already proven
itself to be correct. People such
as you just haven't gotten it yet.
(unknown author)
-----Original Message-----
From: Mallett, Donald B [mailto:Donald.Mallett@BNSF.com]
Sent: Thursday, March 01, 2001 8:12 PM
To: 'DML'
Subject: Re: DML: F&B THROTTLE BODY FOR 4.7L
I have a 4inch opening on my K&N cone filter. This sounds just right.
Don
Geocities.com/maldbnsf
Date: Wed, 28 Feb 2001 15:41:58 EST
From: SEMIHEMI01@aol.com
Subject: DML: F&B THROTTLE BODY FOR 4.7L
Just talked to Bruce, He said the 4.7L TB will be out in March. Around
68
or 70 mm. Will need 4 inch intake tube for throat. May have to chanfer the
mouth of the intake manifold a little to mate up with no turbulance in the
air flow. Way to go Bruce.
Bill
SEMIHEMI01@AOL.COM (Bill C.) 2001 QC, 4.7L, 5spd. 3.55 LSD
K-N + Cool-Air, Quick-D TB, 10w-30 MOBIL 1, 180 T'STAT, SilBlades
GIBSON 3" Single Side-Swept cat-back, G-TECH, <A
HREF="http://hometown.aol.com/semihemi01/">"THE DAK"</A>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:54 EDT