Actually, you can do that with MS Outlook 2000 too.
1: Click on Address Book
2: Right Click on The DML address
3. Select Properties
4. Click on the "Name" tab
5. Click "Send e-mail using plain text"
Ron
00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
For modifications see my DML Profile (URL follows)
http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Thumper
Sent: Friday, March 02, 2001 10:06 PM
To: dakota-truck@buffnet.net
Subject: DML: Re: Re: Request for help - e-mail client configurations
Hey Jon,
In Microsoft Outlook Express 5.0 if a person only wants a single address to
be plain text:
1: Click on addresses
2: Right Click on The DML address
3. Select Properties
4. Click on the "Name" tab
5. Click "Send e-mail using plain text"
With this setup you can pick and choose who receives only plain text and who
can receive other types of mail
Bill Boggs
ICQ# 96440831
thumper72@lvcm.com
http://www.lvcm.com/thumper/white_lightning.html
"White Lightning"
2001 CC 2WD Sport+ 4.7 Auto
>
>
>
> DMLers,
>
> I want to throw together a file for the DML home page that explains how
to
> configure the popular mailers out there to cause them to send their
messages
> out in "ASCII" or "plain text" instead of "HTML", "rich text", etc. Many
e-
> mail clients also send out attachments automatically.
>
> Anyway, as you all probably know, messages with attachments or HTML in
> them
> are bounced from the list. (The reason is that its a real hassle for
folks
> with plain text mailers, and especially for digest readers, no matter what
> mailer they use.)
>
> If you have had to change the settings in your e-mail client to cause it
> to
> send out messages with plain text only, or if you know how it can be done,
> could you send me an e-mail to let me know the exact procedure? I will
also
> need to know the program and version that applies to.
>
> For example: Macrosloth Lookout 5: Go to file, settings, uncheck "rich
> text"
> on the "outgoing e-mail" tab.
>
> Anyway, I'll compile all this info into a file for the web site, and
when
> someone has a problem, I can direct them there, (instead of my usual
> response
> which is comething along the lines of "there is probably a setting
somewhere
> along the lines of xyz in there somewhere, good luck!") so they can
> configure
> their e-mail client properly.
>
> Thanks very much in advance!
>
> --
>
> -Jon-
>
> .---- Jon Steiger ----- jon@dakota-truck.net or
> jon@twistedbits.net ------.
> | Affiliations: AOPA, DoD, EAA, NMA, NRA, SPA, USUA; Rec & UL Pilot -
SEL
> |
> | '92 Ram 150 4x4 V8, '96 Dakota V8, '96 Intruder 1400, '96 FireFly 447
> |
> `------------------------------
> http://www.cs.fredonia.edu/~stei0302/ ----'
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:54 EDT