The material that our manifolds are made out of has a lot of impurities in
them. Have the TIG weld them if you're going to do it. And make sure that
they have welded aluminum before.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Chris Spotts
Sent: Saturday, March 03, 2001 10:19 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: RE: belly pan gasket
How good? Are you saying this is next to impossible? Hey what about all
these machine shop guys producing throttle bodies. How bout producing some
intake manifolds. There would probably be huge demand for these because of
the lack of a b-p gasket. Anyone want to take a shot? Please? Pretty
Please? Please don't make me beg anymore :-)
-Chris
----- Original Message -----
From: "Bernd D. Ratsch" <bernd@texas.net>
To: <dakota-truck@buffnet.net>
Sent: Saturday, March 03, 2001 5:55 PM
Subject: RE: DML: RE: belly pan gasket
>
> Yes it is...but find a VERY good welding shop.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> Subject: Re: DML: RE: belly pan gasket
>
> Is it possible to weld in a piece of metal so that the stock intake has a
> solid bottom and therefore doesn't need the belly pan gasket? I'm talking
> about the V-6 of course since no MPI exists for it.
>
> -Chris
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:55 EDT