thanks ron
----- Original Message -----
From: "Ronald Wong" <ron-wong@home.com>
To: <dakota-truck@buffnet.net>
Sent: Saturday, March 03, 2001 11:39 PM
Subject: DML: RE: Re: RE: Re: RE: 180 Thermostat
> For all magnums, pre-mags, 4.7's
>
> Ron
> 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> For modifications see my DML Profile (URL follows)
> http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
>
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of Arnoldo Silva
> Sent: Saturday, March 03, 2001 9:35 PM
> To: dakota-truck@buffnet.net
> Subject: DML: Re: RE: Re: RE: 180 Thermostat
>
>
> ron 755-180 is for the 4.7?
> thanks arnold
> ----- Original Message -----
> From: "Ronald Wong" <ron-wong@home.com>
> To: <dakota-truck@buffnet.net>
> Sent: Saturday, March 03, 2001 10:51 PM
> Subject: DML: RE: Re: RE: 180 Thermostat
>
>
> > 755-180
> >
> > Ron
> > 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> > For modifications see my DML Profile (URL follows)
> > http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
> >
> >
> > -----Original Message-----
> > From: owner-dakota-truck@buffnet.net
> > [mailto:owner-dakota-truck@buffnet.net]On Behalf Of Arnoldo Silva
> > Sent: Saturday, March 03, 2001 8:44 PM
> > To: dakota-truck@buffnet.net
> > Subject: DML: Re: RE: 180 Thermostat
> >
> >
> > what is the right part number for 180 therm. robert shaw for 4.7 thanks
> > arnold
> > ----- Original Message -----
> > From: "Ronald Wong" <ron-wong@home.com>
> > To: <dakota-truck@buffnet.net>
> > Sent: Saturday, March 03, 2001 10:12 PM
> > Subject: DML: RE: 180 Thermostat
> >
> >
> > > No noticeable improvement but your engine will run cooler.
> > >
> > > Ron
> > > 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> > > For modifications see my DML Profile (URL follows)
> > > http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
> > >
> > >
> > > -----Original Message-----
> > > From: owner-dakota-truck@buffnet.net
> > > [mailto:owner-dakota-truck@buffnet.net]On Behalf Of Batman
> > > Sent: Saturday, March 03, 2001 7:36 PM
> > > To: Dakota
> > > Subject: DML: 180 Thermostat
> > >
> > >
> > > I'm sure there's something about this in the archives, but I'm gonna
ask
> > > anyway. Has anyone actually dyno'd the change to a 180 deg
thermostat?
> I
> > > just picked up a Robert Shaw Gen2 180, gonna put it in tomorrow, just
> > > wondering if I should expect much of a gain by way of the old butt
dyno.
> > >
> > > -Batman
> > > '99 CC Sprt wht 5.2L 5spd 4x4
> > > Open element air cleaner
> > > Turbo II muffler
> > >
> > > _____________________________________________________________
> > > FREE 6MB ZombieWeb E-Mail Account At http://www.zombieweb.com
> > >
> > > Report spam to spam@zombieweb.com
> > >
> > >
> > >
> >
> >
> >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:56 EDT