Considering that you can control the coil signal (timing curve)...probably
yes. You can custom tailor the curve to what you want. (Again, not like the
custom flashed PCM's, but the general curve.)
- Bernd
> So you think this thing would help even with a Mopar HP PCM?
>
> Ron
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> Subject: DML: Update on Superchips ICON Controller
>
> I actually had a chance to mess around with the timing curve over the
> weekend
> and i'm actually now impressed with the box. I purposely advanced the
> timing
> curve too much just to see if it would "ping" (proving that the box actually
> works in process). Yup...it did. I backed it off to excessivly retard the
> timing and the truck had (literally) no power. Yup...it definitely works.
>
> How I did it was that I advanced the timing 10 degrees and then retarded it
> 10
> degrees on a specific RPM band: 2000-3000rpm. (So I could tell exactly if
> it
> was working.)
>
> This little timing controller is actually worth the money in my opinion.
>
> I'm still tweaking my timing curve for best performance so it may take a few
> more days to get it "dialed in".
>
> - Bernd
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:57 EDT