The dealer can only apply new programs that have been given to them by
DaimlerChrysler. These flashes must pass EPA testing. The dealers don't even
know what's in them, or what they do - I asked a dealer what the flash did on
mine when they applied it and they had no clue (and admitted to it). They do
not have the tools or knowledge to modify any of the PCM code independently.
Arnoldo Silva wrote:
> can the factory easily remove the speed limiter and change stuff like add
> more timing. just wondering because budy owns dealership and if they can
> maybe ill ask him.
> thanks arnold
> ----- Original Message -----
> From: "Ronald Wong" <ron-wong@home.com>
> To: <dakota-truck@buffnet.net>
> Sent: Monday, March 05, 2001 11:02 AM
> Subject: RE: DML: 4.7l of Dissapointment
>
> > The speed limiter set at the factory is determined by the wheels and tires
> > that came with your truck. They only set the limiter as high as the speed
> > rating for your tires.
> >
> > Ron
> > 00 PB SLT QC 4X2 5.9 46RE 3.92 LSD
> > For modifications see my DML Profile (URL follows)
> > http://www.twistedbits.net/WWWProfile/dakota/Kw9pV1EkFeOYY
> >
> >
> > -----Original Message-----
> > From: owner-dakota-truck@buffnet.net
> > [mailto:owner-dakota-truck@buffnet.net]On Behalf Of MALDBNSF@aol.com
> > Sent: Monday, March 05, 2001 6:14 AM
> > To: dakota-truck@buffnet.net
> > Subject: Re: DML: 4.7l of Dissapointment
> >
> >
> >
> > In a message dated 3/4/01 9:31:46 PM, mopar88@efortress.com writes:
> >
> > << It would not accelerate past 108mph. >>
> >
> > Hey what I'm doing worng? I can only get mine up to about 97!
> >
> > Don
> > Y2K QC 4.7L Auto 3.55
> > Geocities.com/maldbnsf
> >
> >
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:58 EDT