Kyle,
I'm heading down to CA this weekend. I've already got about 6 of the rubber
gaskets waiting for me at Speed Merchant. You need some?
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
Subject: DML: Air Cleaner Gasket Update
Well I have been using a gasket I found at NAPA made for carburetors with
5 -1/8" necks. This gasket is like a pressed gasket, similar to the TB
gasket, just thicker. I ran me $2.75. I was going to pay $9.39 through
Summit and order a Holley gasket, which would fit any carb/TB with a 5-1/8
neck. Today I stopped by the dealer to pick up a new AIS/IAC sensor, and
found that infact I should have had one on my truck this entire time.
Whoops! The dealer gasket is a rubber like gasket(feels like a serpentine
belt like rubber) and is about 1/4" thick. The part number for this gasket
is 53032451-AA and it costs $2.95.
Side note: The AIS/IAC sensor's part number is 53030657-AC and it ran me
$51.85.
Kyle
93 Dakota 4x4 V6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:59:58 EDT