I installed Pioneer components in mine. The sound is awesome. I put the
tweeters right up where the factory tweeters would go. (There was a
circular mark on the inside of the door panel that I used a hole saw and cut
it out. The adjustable recessed tweeters look the best compared to surface
mount ones.
One word of caution for anyone reading... When taking off the door panels,
roll the windows down and only do one door at a time. Also make sure that
you hook up the door latch. If you forget, the door will not open from the
outside (or is it inside?). With the window rolled down, you will be able
to at least get the door open.
Chris
'99 Dakota Sport + CC 4x4 Amethyst
----- Original Message -----
From: Jim Miller <jim76712@swbell.net>
To: <dakota-truck@buffnet.net>
Sent: Sunday, March 11, 2001 10:08 AM
Subject: Re: DML: 3-way component speakers
> I have. There are 8s in my doors, 5s and dome tweeters in the kick panels
and a
> 10 sub behind the driver seat. I have 1 4 channel amp 60 per channel for
the
> 8s, 5s and tweets and a 260 bridged for the sub.
> Jim in Waco
> 99 R/T RC
>
> Patrick Delgado wrote:
>
> > Hi everyone,
> > Has anyone installed 3-way component speakers in thier dak? They aren't
too
> > common, I've done web searches and only found a couple systems. I'd like
to
> > install 6 1/2 - 8" in doors and midrange and tweeters in kickpanels. Is
this
> > an big improvement over 2-ways?
> > Patrick Delgado
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:07 EDT