Run a small wire from the power supply (to the fan) into the light, then
ground the other side of the light. when the relay closes and sends power
to the fan, it also sends power to the light
______________________
Jon Smith--Raleigh, NC
www.fast4x4.net
jon@fast4x4.net
344hp/424tq
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
-
- I would like to install a light in my interior that lights when my
-Hayden electric fan is running, but I am unsure which wire from
-the relay to
-tie into though. Would I tie into the positive lead from the fan (which is
-connected to the orange & blue wires from the relay)? Also would I have to
-tie into the ground from the fan/relay or could I just use a
-chassis ground?
-
-Thanks,
-
--- -Chuck Robbins -'99 Dakota Sport -www.intense99dak.com - - -
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:26 EDT