RE: Hayden fan question

From: Bernd D. Ratsch (bernd@texas.net)
Date: Sun Mar 25 2001 - 11:00:29 EST

Next message: SEMIHEMI01@aol.com: "Re: RE: synthetics"
Previous message: Bernd D. Ratsch: "RE: RE: RE: What a difference"
In reply to: Chuck Robbins: "Hayden fan question"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Use the ground side for the ON/OFF signal. I totally forgot which wire it
is, but I think it was the white one from the Hayden. Dbl-check your
instructions though.

- Bernd

-----Original Message-----
From: owner-dakota-truck@BUFFNET.NET
[mailto:owner-dakota-truck@BUFFNET.NET]On Behalf Of Chuck Robbins
Sent: Sunday, March 25, 2001 9:29 AM
To: dakota-truck-moderator@bent.twistedbits.net
Subject: DML: Hayden fan question

I would like to install a light in my interior that lights when my
Hayden electric fan is running, but I am unsure which wire from the relay to
tie into though. Would I tie into the positive lead from the fan (which is
connected to the orange & blue wires from the relay)? Also would I have to
tie into the ground from the fan/relay or could I just use a chassis ground?

Thanks,

--
Chuck Robbins
'99 Dakota Sport
www.intense99dak.com

Next message: SEMIHEMI01@aol.com: "Re: RE: synthetics"
Previous message: Bernd D. Ratsch: "RE: RE: RE: What a difference"
In reply to: Chuck Robbins: "Hayden fan question"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:26 EDT