Hey Steve!
I recently changed my '92's belt and after putting my wrench to the
tensioner, it too stayed "open". I lubed it up and moved the wrench back and
forth a few times and it brought it back to life. Give it a shot!
Sean
'92 RC Sport 3.9L 5spd - 250,000mi!
'01 CC SLT+ 4.7L 5spd 3.92 LSD Mobil-1!
-----Original Message-----
From: Steve [mailto:jsm@iglou.com]
Sent: Friday, March 30, 2001 2:27 PM
To: dakota-truck@buffnet.net
Subject: DML: Belt tensioner
When changing the serpentine belt is it normal for the tensioner to remain
in the "loose" position after turning the nut clockwise? I thought it was
under constant tension counter-clockwise to maintain proper tension on the
belt. Do I have a bad tensioner?
Steve
jsm@iglou.com
Lou-a-vull, KY
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:36 EDT