You can also tell by looking at the part number stamped on the top of the TB
53013241AC is a 65mm
53013163AA is a 68mm
----- Original Message -----
From: <MALDBNSF@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Sunday, April 08, 2001 5:48 AM
Subject: Re: FW: DML: Re: RE: 4.7L throttle body, 2001 in 2000?
> Before you go out and buy a 68mm TB, Check the one you have. I have a
>
> 4.7L/auto in my '00 QC and it came with the 68mm TB. The size of the TB is
>
> stamped on the back of the plate. I'm sure you know what you have but just
>
> covering the bases here.
>
>
> Don
>
>
>
>
>
> > > Has anyone actually made this swap? I know the 2001 TBs are 68mm vs
the
>
> > > 65mm that came in the 2000 models. Is everything else the same for a
>
> > direct
>
> > > bolt-on replacement? I have heard yes, but never from anyone who has
>
> > > actually done it. If it will work I will make the swap and post
before
>
> > and
>
> > > after G-tech numbers.
>
> > >
>
> > > Thanks
>
> > > Wxman
>
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:00:59 EDT